Product ID:READY SOLV HP & HP/B
MSDS Date:01/01/1987
FSC:6850
NIIN:00F003013
MSDS Number: BBMGD

BECKMAN INSTRUMENTS, INC

Emergency Phone: (714) 773-8061

Cage: 73138

BECKMAN INSTRUMENTS, INC.

FULLERTON, CA 92634

Telephone: (714) 773-8061

Cage: 73138

PSUEDOCUMENE

Fraction By Weight: 80%

ACGIH TLV: 50 PPM

FLUORS

Fraction By Weight: 20%

EMULSIFIER

Fraction By Weight: 20%

Effects of Overexposure:MAY BE CNS DEPRESSANT, RESPIRATORY IRRITANT.

First Aid:EYE CONTACT: IRRIGATE W/WATER, GET MEDICAL ATTENTION. SKIN
CONTACT: WASH W/SOAP & WATER. REMOVE CONTAMINATED CLOTHES, USE
APPROVED LOTION OR CREAM TO REPLACE SKIN OILS. INHALATION: REMOVE
VICTIM TO FR ESH AIR.

Flash Point:43C (CC)
Lower Limits:1.1%
Upper Limits:7.0%
Extinguishing Media:DRY CHEMICAL, FOAM, CO2, WATER FOG TO SMOTHER FIRE
Fire Fighting Procedures:A WATER STREAM CAN SCATTER FLAMES.
Unusual Fire/Explosion Hazard:VAPOR >AIR, MAY FLOW TO DISTANT IGNITION
SOURCES.

Spill Release Procedures:NOTIFY SAFETY PERSONNEL, REMOVE ALL IGNITION
SOURCES, PROVIDE ADEQUATE VENTILATION. E VERMICULITE OR SAND TO
ABSORB SPILL AND PLACE IN A COVERED METAL CONTAER.

Handling and Storage Precautions:STORE IN COOL, WELL VENTILATED AREA
AWAY FROM SOURCES OF HEAT OR IGNITION.
Other Precautions:AVOID SKIN CONTACT, AVOID REPEATED OR PROLONGED
BREATHING OF VAPOR. DON'T INGEST.

Respiratory Protection:ORGANIC VAPOR CANNISTER RESPIRATORS
Ventilation:LOCAL EXHAUST: EFFICIENT
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:APRONS
Supplemental Safety and Health
PART NO: 566436, 582842, 566766, 531909, 531908, 531904, 593966.

Boiling Pt:B.P. Text:170F
Vapor Pres:1.6
Vapor Density:4
Spec Gravity:0.90
Evaporation Rate & Reference:0.6
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORLESS LIQUID, AROMATIC ODOR
Percent Volatiles by Volume:80%

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:KEEP AWAY FROM HEAT SOURCES/IGNITION
SOURCES/OXIDIZING AGENT
Hazardous Decomposition Products:NONE

Waste Disposal Methods:SCRAP LIQUID MAY BE ATOMIZED INTO AN APPROVED
INCINERATOR OR DISPOSED OF VIA A LICENSED DISPOSAL COMPANY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.